Fiber Turntable Filter Cloth Filter (QBFP Series)

Raw water enters the filter through the inlet weir plate and passes through the filter cloth under gravity action. During filtration, the floss with a particle size of a few microns can be trapped by laying down the cloth pile. After the raw water is filtered through the filter cloth, the clean water enters the inside of the filter disc and flows into the adjustable outlet weir through the rotating drum of the filter disc. With the progress of filtration, the material trapped on the filter cloth increases, the filtration speed gradually decreases, and the water level in the filter tank rises. When the water level rises to the set value, the control system starts the backwashing process and starts cleaning the filter cloth. The driving motor drives the center drum to rotate, the suction cup is close to the surface of the filter cloth for negative pressure suction, the solids trapped between the fluff fibers are released, and the water in the filter plate is sucked out from the inside out, bringing the particles deposited on the filter plate together to achieve the purpose of cleaning.